Water miscible drawing oil

Examples of Application
·  Drawing of brass rods and wires (cast wire rods) pre drawing with stearate or drawing paste
·  High drawing speeds even at multi-line drawing in a range of 2 – 6 mm, final diameters of approx. 0.7 mm are possible

·  Non-ferrous metal

·  Very good lubricating properties
·  Also suitable for processing of non-ferrous metals
·  Chlorine and sulphur free *

Characteristic data
·  Appearance : brown, clear fluid


Density at 20 °C

g/cm3 0.91 – 0.93

AA_003-9 acc. to DIN 51757

Kin. viscosity at 40 °C

mm2/s 60 – 80

AA_003-132 acc. to ASTM D 446

Flash point

°C ≥ 130

AA_003-125 acc. to ISO 2592

Pour point


AA_003-129 acc. to DIN ISO 3016


Instructions for use

·  The formed pieces can be easily cleaned with conventional solvents or in aqueous alkaline degreasing baths

·  Forms stable emulsions when washed off with water

·  Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +60 °C

* Chlorine and sulphur are not part of the product formulation