Multi purpose paste

Examples of Application
·  Prevent seizure and improve running in phase of toothed wheels, worm gears or gear boxes
·  No damage during running in phase by smoothing surface roughness of plain bearings, threaded spindles, splined shafts and tailstock center
·  Slide bars, guides and supports of tooling machining
·  Eliminates stick slip at low sliding speeds and high surface pressure
·  No scoring of press fits

·  Prevents stick slip
·  Prevents damage during running in
·  Water resistant
·  Protects from fretting corrosion
·  Long tool life and surface qualities in machining processes
·  Contains MoS2

Characteristic data
·  Service temperature : -25 °C to +450 °C
·  Appearance : black
·  NLGI grade : 2 – 3
·  Denomination acc. to DIN 51502 : MF 3 U-20




Worked penetration

1/10 mm 240 – 260 DIN ISO 2137

Base oil

Mineral oil

Kin. viscosity at 40 °C mm2/s approx. 480

DIN 51562

Kin. viscosity at 100 °C mm2/s approx. 35

DIN 51562


Instruction to use

·  Apply a thin layer to the previously cleaned surface with a leather rag or by brush