Deep drawing oil

Beruform STO 8006 is a high viscous mineral oil free product with excellent lubricating properties. It contains an effective combination of active AW and EP additive. The product excels by extraordinary adhesion to the metal surface and prevents tools and machines from corrosion. It is free from chlorine, heavy metals and pigments.

Beruform STO 8006 is used for severe to very severe non cutting forming operations on multiple stage presses. The product is applied by drop oiling, brushing or rolling. It is suitable for steels, galvanised steels, stainless steels and aluminium alloys. Other examples of application are coiling and calibration of chain sleeves of stainless steels as well as drawing of wires and demanding profiles of alloys difficult to form (e.g. German silver, aluminium bronze, titanium alloys, stainless steels, etc.).
The formed parts can be easily cleaned with conventional solvents or in watery alkaline degreasing baths.

·  Non water miscible deep drawing oil
·  Not suitable for non-ferrous metals
·  Chlorine, heavy metal and pigment free *

Characteristic data
·  Appearance : Red brown liquid


Density at 20 °C

g/cm3 1.00 – 1.02

AA_003-9 acc. to DIN 51757

Kin. viscosity at 40 °C

mm2/s 720 – 880

AA_003-133 acc. to DIN 51562

Flash point

°C ≥ 200

AA_003-125 acc. to DIN ISO 2592


(*) Chlorine, heavy metal and pigment are not part of the product formulation