BECHEM UNOPOL SP 930
Multi purpose lubricant
Examples of Application
· Spraying oil which is used for slightly oiling the copper wire or tinned copper wire after the annealing process
· This is necessary in order to avoid wire breaks when using a spooling unit achieve good sliding of the wire for the subsequent stranding process maintain sufficient lubricity for the subsequent compressing process protect the copper wire against discoloration during storage
Properties
· Low viscous
· Sprayable
· High protection
· Compatible with all BECHEM wire drawing lubricants
Characteristic data
· Appearance : colorless, yellowish fluid
Density at 20 °C |
g/cm3 | 0.735 – 0.765 |
AA_003-9 acc. to DIN 51575 |
Kin. viscosity at 20 °C |
mm2/s | 1.8 – 2.4 |
AA_003-133 acc. to DIN 51562 |
Kin. viscosity at 40 °C |
mm2/s |
1.3 – 1.9 |
|
Kin. viscosity at 50 °C |
mm2/s |
1.1 – 1.7 |
|
Flash point |
°C | ≥ 75 |
AA_003-125 acc. to DIN EN ISO 2592 |