BECHEM MASTERDRAW EBE 350
Drawing oil
Examples of Application
· Drawing oil for tubes, rods and profiles
· Extruded tubes and pilger tubes as well as soaped and dry pre drawn tubes for inner and outer lubrication
· Straight drawing benches and drum drawing machines
· Drawing speeds up to 1,000 m/min
Materials
· Copper
· Brass
Properties
· Very low carbon contents on the inner pipe surface
· Chlorine, phosphor or sulphur free *
Characteristic data
· Appearance : amber, clear liquid
Density at 15 °C |
g/cm3 | 0.895 – 0.915 |
AA_003-9 acc. to DIN 51757 |
Kin. viscosity at 40 °C |
mm2/s | 520 – 600 |
AA_003-132 acc. to ASTM D 446 |
Instructions for use
· Can be applied volume controlled in TOTAL LOSS® procedure, manually, or in recirculation lubrication when suitable pump systems can be used
· Can be easily cleaned by vapor degreasing or solvent washing methods.
· Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +50 °C
* Chlorine, sulphur or phosphor are not part of the product formulation