BECHEM MASTERDRAW 5128
Synthetic drawing oil
Examples of Application
· For internal lubrication in drawing of non-ferrous tubes such as copper and copper alloys
· Inner grooving of copper tubes
Properties
· Cleanest surfaces without contaminating the annealing atmosphere
· Low tendency to residue formation
· Long tool life
· Chlorine and sulphur free *
Characteristic data
· Appearance : light brown fluid
Density at 20 °C |
g/cm3 | 0.87 – 0.89 |
AA_003-9 acc. to DIN 51 757 |
Kin. viscosity at 40 °C |
mm2/s | 110 – 140 |
AA_003-132 acc. to ASTM D 446 |
Flash point |
°C | ≥ 160 |
AA_003-125 acc. to DIN EN ISO 2592 |
Instructions for use
· Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +50 °C
* Chlorine and sulphur are not part of the product formulation