BECHEM MASTERDRAW 3243

Non water miscible drawing oil

Examples of Application
·  Drawing of non-ferrous tubes with high to low wall thickness
·  Specifically for drawing of copper tubes on drum drawing machines and draw benches

Properties
·  Cleanest surfaces without contaminating the annealing atmosphere
·  Excellent viscosity index
·  Long tool life
·  Contains mineral oil
·  Chlorine and sulphur free *

Characteristic data
·  Appearance : light amber fluid

 

Density at 20 °C

 g/cm3 0.87 – 0.90

AA_003-9 acc. to DIN 51 757

Kin. viscosity at 100 °C

 mm2/s 220 – 285

AA_003-132 acc. to ASTM D 446

Flash point

 °C ≥ 180

AA_003-125 acc. to DIN EN ISO 2592

 

Instructions for use

·  Can be applied volume controlled by TOTAL LOSS ® process or manually or in combination with circular lubrication when suitable pump systems available

·  Can easily cleaned with vapor degreasing or solvent washing methods

·  Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +50 °C

* Chlorine and sulphur are not part of the product formulation

Post Views: 6