BECHEM BERUSIL P 140 SPRAY

Silicone oil based lubricating and antiseize spray

Examples of Application
·  Assembly aid : o-rings, lip seals, sleeves from rubber elastic materials, precision spindles and adjusting screws in precision mechanics or optical instruments
·  Lubricant : guideways, sliding plates, plastic rollers and bearings, chains, roller beds, slide doors, etc.
·  Antiseize agent : seals in deep freezing plants, suitable for cutting or punching knives to achieve clean cuts on cardboard, paper or gummed paper, for welding dies and electrodes used in hot sealing, HF or ultrasonic welding to prevent sticking of plastics

Materials
·  Non-ferrous metals
·  Plastics
·  Elastomers

Properties
·  Neutral in smell and taste
·  Minimum evaporation loss at high temperatures
·  Good wetting properties
·  Very good dielectric levels
·  Excellent creeping properties
·  Best release properties
·  Very well resistant to hot water and water steam
·  Very good plastic and elastomer compatibility
·  Resistant to water, organic solvents, pure oxygen and a number of chemical substances

Characteristic data
·  Service temperature range : -40 °C to +150 °C
·  Appearance : clear, colorless fluid
·  Propellant : Propane / butane

Approvals / References / Certificates
·  H1 registered

 

Data of the active substance
Density at 25 °C	g/cm3	approx. 0.97	DIN 51757
Kin. viscosity at 40 °C	mm2/s	approx. 260	DIN 51562
Kin. viscosity at 100 °C	mm2/s	approx. 110	DIN 51562

 

Instructions for use

·  Prior to serial production compatibility tests are recommended

Please observe the advice given in the current EEC Health & Safety Data Sheet

According to valid legislation, the product is not hazardous to health

* This lubricant is not suitable for consumption