BECHEM BERUPLEX PMC 42 F
High performance lubricant
Examples of Application
· Plain and roller bearings in mining
· Bearings of heavy mining equipment
· Compactors
· Crushers
· Vibrating screens
· Bearings from rolling mills
· Roll presses and other presses
· Slew ring bearings of cranes, shovels, excavators and ladles
· Guide pads of large drive shaft joints
· Central lubrication systems
· Steel industry
· Cement industry
· Construction
Properties
· Very high load carrying capacity based on EP additive and solid lubricants
· Good pumpability
· Reliable corrosion protection
· Reduces friction and wear
Characteristic data
· Service temperature : -20 °C to +140 °C
· Appearance : black
· NLGI grade : 1 – 2
|
Thickener |
Special calcium complex soap |
||
|
Worked penetration |
1/10 mm | 285 – 315 |
DIN ISO 2137 |
|
Drop point |
°C | ≥ 240 |
IP 396 |
|
Corrosion protection (EMCOR test) |
degree of corrosion | 0 and 0 |
DIN 51802 |
|
Four ball weld load |
N | ≥ 7,000 |
DIN 51350-4 |
|
Timken test Load |
lbs mg | ≥ 45 ≤ 5 |
AA_003-74 acc. to SEB 181302 |
|
Copper corrosion test (24 h/100 °C) |
degree of corrosion | 1 |
DIN 51811 |
|
Water resistance |
evaluation grade | 0 – 90 |
DIN 51807-1 |
|
Flow pressure at -20 °C |
mbar | ≤ 1,000 |
DIN 51805 |
|
Base oil |
Mineral oil |
||
|
Kin. viscosity at 40 °C |
mm2/s | approx. 400 |
DIN 51562 |
|
Kin. viscosity at 100 °C |
mm2/s | approx. 26 |
DIN 51562 |
Instructions for use
· Prior to serial production compatibility tests are recommended