BECHEM BERULUB PASTE PM 30
Assembly and lubricating paste
Examples of Application
· Assemble, lubricate or seal press fits, grooved wedges, screw spindles, roller bearing seats as well as bolts, screws, guideways
· Dry lubricant of temperature stressed lubricating points with low speeds
· Rotating mechanisms in steel works and power plants
· Textile industry and assembly departments
Properties
· Protects against fretting corrosion
· Water resistant
· Prevents friction and wear up to 450 °C
· Contains MoS2
Characteristic data
· Service temperature : -20 °C to +450 °C, with reduced access of air up to +650 °C
· Appearance : black
· NLGI grade : 2 *
|
Thickener |
Polyurea | ||
|
Unworked penetration |
1/10 mm | 265 – 295 | DIN ISO 2137 |
|
Drop point |
°C | ≥ 230 | IP 396 |
|
Solid lubricant MoS2 |
% |
approx. 30 |
|
| Base oil |
Mineral oil |
||
| Kin. viscosity at 40 °C | mm2/s | approx. 150 |
DIN 51562 |
| Kin. viscosity at 100 °C | mm2/s | approx. 11 |
DIN 51562 |
Instruction to use
· Same as with greases. Apply plenty of the lubricant to the cleaned functional surfaces (press fits, threads, bearings). In specific cases which require the formation of a dry lubricating film it is recommend to apply the paste by brush and spread it evenly over the complete surface
* The indication refers to the unworked penetration