BECHEM BERULIT 906 HP
Lubricant for massive forming
Examples of Application
· Cooling and lubrication
· Die forging at +1,280 °C
Material
· Steel
· Non-ferrous metal
· Stainless steel
Properties
· Offers anti wear protection
· Good release effect
· Graphite containing lubricant with a low particle size
Characteristic data
· Service temperature : +120 °C to +350 °C
· Appearance : black
Evaporation residue |
% | 30 – 35 |
AA_003-120 |
Density at 20 °C |
g/cm3 | 1.19 – 1.21 |
AA_003-9 acc. to DIN 51757 |
Efflux time at 20 °C |
s | 20 – 30 |
AA_003-121 acc. to DIN ISO 2431/6 |
pH value |
10.0 – 11.5 |
AA_003-33 acc. to DIN 51369 |
Instructions for use
· Applied on the tools by suitable spraying systems, best by fine atomization
· After spraying and drying a black effective layer remains on the tool which provides good lubricating and release effect during the forming process
· Depending on the requirements and severity of the forming process, it should be mixed with water in a ratio from 1:1 up to 1:10
· Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +50 °C