BECHEM BERUFORM STO 3508
Non water miscible forming oil
Examples of Application
· Most demanding sheet forming operations
· Punching
· Fine blanking
· Deep drawing
· Pressure forming
Material
· Stainless steel
· Steel
· Galvanised steel
Properties
· Long tool life
· Extremely good adhesion on metal surfaces
· Good corrosion protection
· Balanced combination of AW and EP
· Chlorine free **, hence Increased occupational safety
· Unsuitable for machining non-ferrous metals additive *
Characteristic data
· Appearance : brown fluid
Density at 20 °C |
g/cm3 | 1.03 – 1.05 |
AA_003-9 acc. to DIN 51757 |
Kin. viscosity at 20 °C |
mm2/s | 1,170 – 1,430 |
AA_003-133 acc. to DIN 51562 |
Kin. viscosity at 40 °C |
mm2/s | 315 – 385 |
AA_003-133 acc. to DIN 51562 |
Flash point |
°C | ≥ 145 |
AA_003-125 acc. to DIN ISO 2592 |
Instructions for use
· Product is applied manually by drip oiler, rollers or suitable pneumatic lubricating equipment
· Observe viscosity data of the equipment manufacturers
· The formed pieces can be easily cleaned with conventional solvents or in aqueous alkaline degreasing baths
* Anti Wear / Extreme Pressure additive
** Chlorine containing additives are not included in the formulation