BECHEM BERUFORM STO 3009 C

Chlorinated drawing oil

Examples of Application
· Tubes and profiles of Cr Ni steels, high temperature steels, heat resistant steels as well as titanium
· Demanding forming operations

Properties
· Reduces wear
· Contains chlorine
· Heavy metal free *

Characteristic data
· Appearance : brown fluid

Density at 20 °C	g/cm³	1.34 – 1.36	AA_003-9 acc. to DIN 51757
Kin. viscosity at 20 °C	mm²/s	3,330 – 4,070	AA_003-133 acc. to DIN 51562
Kin. viscosity at 40 °C	mm²/s	1,170 – 1,430	AA_003-133 acc. to DIN 51562

Instructions for use

· Metal abrasion during drawing processes cannot be avoided and it is not possible to remove these particles by economical procedures. Therefore please make sure that water cannot get into the drawing oil

* Heavy metal additives are not part of the product formulation

Post Views: 3