BECHEM BERUFORM MF 465

High performance forming oil

Examples of Application
·  Demanding sheet forming operations
·  Punching
·  Fine blanking
·  Deep drawing
·  Bending

Material
·  Steel
·  Aluminium
·  Stainless steel
·  Non-ferrous metal

Properties
·  Long tool life
·  Extremely good adhesion on metal surfaces
· Good corrosion protection
·  Balanced combination of AW and EP additive *
·  Chlorine free **, hence Increased occupational safety
·  Well suitable for processing of non- ferrous metals

Characteristic data
·  Appearance : brown fluid

Approvals / References
·  Tested KTL compatibility **

 

Density at 20 °C	g/cm3	0.91 – 0.93	AA_003-9 acc. to DIN 51757
Kin. viscosity at 20 °C	mm2/s	90 – 110	AA_003-133 acc. to DIN 51562
Kin. viscosity at 40 °C	mm2/s	36 – 44
Kin. viscosity at 50 °C	mm2/s	24.5 – 30.5
Flash point	°C	≥ 180	AA_003-125 acc. to DIN ISO 2592

 

Instructions for use

·  Product is applied by spray equipment, drip oiler, rollers or brush

·  The formed pieces can be easily cleaned with conventional solvents or in aqueous alkaline degreasing baths

* Anti Wear / Extreme Pressure additive

** Chlorine containing additives are not included in the formulation

*** Confirmed by BASF Coatings GmbH, Münster and PPG Deutschland Sales and Service GmbH, Wuppertal