Coating lubricant for cold massive forming

Examples of Application
·  Complex parts for cold massive forming
·  Forward and backward extrusion
·  Also suitable for multi stage processes

·  Steel
·  Stainless steel
·  Titanium

·  Aqueous suspension of solid lubricants
·  Produces very smooth surfaces
·  Very high forming degrees can be achieved
·  Thermal stability of the coating up to 500 °C
·  Ready to use product

Characteristic data
·  Appearance: black


Evaporation residue

% 12 – 17


Density at 20 °C

g/cm3 1.08 – 1.15

AA_003-9 acc. to DIN 51757

Efflux time at 20 °C

s 20 – 30

AA_003-121 acc. to EN ISO 2431/4

pH value

10.5 – 11.4

AA_003-33 acc. to DIN 51369


Instructions for use

·  Can be mixed with water in any ratio to adjust the desired service concentration

·  The required film thickness on the part surface depends on the desired degree of deformation and is adjusted via concentration

·  Residues can be easily removed with hot water

·  Storage : Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +40 °C

·  Application

– The surfaces of the blasted blank parts are coated by dip application

– Parts are coated in the coating bath at temperatures between 75 °C and 85 °C in intervals for five minutes. Afterwards, if required, the parts are dried by means of hot air in intervals

– The coating bath can be heated up to 90 °C under constant circulation