BECHEM BERUCOAT AF 230
Heat curing anti friction coating on solvent basis
Examples of Application
· Especially suitable for coating of metals
· Suitable for permanent contact with oils and greases
· Closure systems e.g. locking parts
· Seat systems e.g. locking devices
Material combinations
· Metal / metal
Properties
· High pressure resistance
· Excellent temperature resistance
· Very good adhesion on metal surfaces
· Good corrosion protection
· Resistant to oil, grease and solvent
· Low friction values based on solid substances
Characteristic data
· Service temperature : -70 °C to +250 °C
Appearance |
Grey fluid |
AA_003-22 |
|
Appearance dry film |
Grey |
AA_003-22 |
|
Density at 20 °C |
g/cm3 | 1.16 – 1.20 |
AA_003-9 acc. to DIN 51757 |
Kin. viscosity at 20 °C nozzle 4 |
s | 44 – 50 |
AA_003-121 acc. to DIN EN ISO 2431 |
Solid content |
% | 38 – 42 |
AA_003-120 |
Composition
· Solid lubricants
· Organic binder
· Organic solvent
Instructions for application
· Parts must be cleaned and degreased thoroughly before coating
· Improved adhesion on the surface by : sandblasting and/or phosphatizing
· Coating must be stirred well before use
· High economic efficiency thanks to very low consumption (1 kg is sufficient for a surface of up to 20 m2)
· Application by spraying, dip centrifuging or tumbling
· Application on hot surfaces (120 °C) is possible
· Curing time at 200 °C : object temperature approx. 30 minutes
· Curing time at 130 °C : object temperature approx. 60 minutes
· Optimal thickness of coating: approx. 10 – 30μm
· Recommended diluting agent: AFC Solvent PMA
· Kinematic viscosity at 20 °C, nozzle 4 mm 17 – 20 s (DIN 53211 *)
Shelf life
· At least 24 months from date of production when stored at ambient temperatures (approx. 20 °C) in the original sealed container
* Standard withdrawn